Providing optimized solutions for your mine, one-stop service for mineral processing plant!
Xinhai mineral processing equipment mainly include: grinding equipment, flotation equipment, dewatering equipment, magnetic separation equipment, and so on. Some of the equipment is Xinhai independent research and development, and has been awarded national patent. View details
Gold CIL (Carbon in Leach) Process is an efficient design of extracting and recovering gold from its ore. By cyaniding and carbon leaching crushed gold ore slurry simultaneously, CIL process lower the gold mining operation cost and increase gold recovery rate to a degree of 99%. View details
Time flies, 2019 is almost half over. Looking back on the first half of the year...
A few days ago, the mineral processing equipment that Xinhai Mining produced for...
Spiral classifier and hydrocyclone are both mineral processing classifiers. The mineral processing classifier generally include four kinds, increased flow hydrocyclone classifier, cone classifier, a centrifugal classifier( hydrocyclone ) and mechanical classifier ( rake classifier, spiral Classifier, and Floating tank classifier). Today, we will only choose Spiral classifier and hydrocyclone this two equipment to make a detailed comparison, that is because they are the most widely used classifiers in our mill plant, at present.
Spiral Classifier is a kind of mechanical classifier, and it is composited by a u-shaped water tank, spiral device, transmission device, lifting mechanism, bearings and other parts.
The working principle of spiral classifier is: the milled pump was fed into the u-shaped slot from spiral classifier’s feeding mouth, after the continuous rotations and stirrings of the spiral device, the light, and fine particles were suspended in the pulp surface and flowed from the overflow weir; and the thick and heavy particles were settled to the bottom, transported by the spiral device to the port of discharge, re-entered the mill grinding.
There are generally two spiral classifier classification methods, one is in accordance with the number of the screw shaft, it can be divided into single and double spiral classifier spiral classifier; Another kind is according to the overflow weir height, it can be divided into high low weir, weir and submerged.
Hydrocyclone is a kind of using centrifugal force role grading equipment, mainly made up by the feed tube, cone, cylinder shell, sand mouth and overflow pipe, etc.
The working principle of hydrocyclone is: under the pressure of 0.5-2.5 kg / cm2 in the inlet, the pulp was feed into the cyclone cylinder along the along the tangent direction of the feed tube. A great deal of centrifugal force was produced because of the rotations of the inside part of hydrocyclone, under the action of centrifugal force, the coarser one was thrown to the wall, along with the spiral descent flow, and was discharged from the discharge mouth.
Advantages of hydrocyclone are: It is simply constructed and has no moving parts; the small size covered small footprint; it has large capacity per unit area, and it’s very convenient to operate and maintain, so, the cost is very low; what’s more, the classification efficiency and sorting accuracy are higher; and it needs lesser quantity and time for pulp to stay; the advantages are more apparent when working together with a large ball mill. Of course, the hydrocyclone has its shortcomings, such as the pulp needs the head of the pump to delivery; it needs stable working pressure when working, and it has a higher demand to the particle size and concentration of the pulp, what else is that it can be worn more serious.
Spiral classifier has more significantly highlighting advantages compared with hydrocyclone, such as, It is reliable and easy to operate; the staging area is smooth and finer overflowed particle size can be obtained. What’s more, the trough slope is easier for sand returning into to the ball mill. In addition to these, some of domestic mining machine manufacturers make some improvements to a spiral classifier, for example，Yantai Xinhai mining machinery company has added a sand-returning automatic lifting device in the sand-returning end of the spiral classifier, in order to substitute the tablespoons head of the ball mill. That makes the ball mill run more smoothly.
Shortcomings of spiral classifier are: It’s relatively cumbersome and the classification efficiency is low; the spindle is frangible and the maintenance is extremely inconvenient; and it has poor overflow bearing seal at the bottom of spiral classifier; what else, a finer classification overflow fineness is difficult to get especially when the asked overflow granularity is -0.074mm and accounts more than 90%.
Overall, spiral classifier and hydrocyclone are widely applied in our country, each of them has his strong point.
The thickener is mainly used for the thickening of ore concentrate and the dewatering of tailings and purification in the mineral processing plans. ... [more]
China is rich in molybdenum ore resources, taking up 25% in the world in terms of molybdenum gross, which is the second in the world. ... [more]
Please leave your message here! We will send detail technical info and quotation to you!
Project | Video
Tel: 0086 15311826765
Fax: 0086 10 59621207
Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China
© 2017 Shandong Xinhai Mining Technology & Equipment Inc. Technical Support: 北京鑫互联科技有限公司
© 2017 Shandong Xinhai Mining Technology & Equipment Inc.