Providing optimized solutions for your mine, one-stop service for mineral processing plant!
Xinhai mineral processing equipment mainly include: grinding equipment, flotation equipment, dewatering equipment, magnetic separation equipment, and so on. Some of the equipment is Xinhai independent research and development, and has been awarded national patent. View details
Gold CIL (Carbon in Leach) Process is an efficient design of extracting and recovering gold from its ore. By cyaniding and carbon leaching crushed gold ore slurry simultaneously, CIL process lower the gold mining operation cost and increase gold recovery rate to a degree of 99%. View details
On October 11, the 3-day CHINA MINING Conference and Exhibition 2019 was conclud...
Hydrocyclone is a classifying device by centrifugal force in the rotary flow. Because of its simple structure, huge dealing capacity and process effect, hydrocyclone is widely used in classification, thickening, dewatering.
Like a common cyclone, the main body of hydrocyclone is connected by empty cylinder and cone. There is an overflow pipe in the center of the cylinder, and a feeding pipe at the tangential direction, and desilting throat at the bottom of the cone. Slurry flow into the cyclone by pressure through feeding pipe, and rotating limited by the wall. Thick granules are in the outside slurry, and the outside slurry is down to the bottom through the rotation, which is called the outside spiral flow. Small granules and water are in the inside slurry. With the downflow area smaller and smaller, the inside slurry is forced to flow upwards, which is called inside the spiral flow. Finally, the outside spiral flow expels from the desilting throat, to be underflow. The inside spiral flow expels from the overflow throat, to be overflow.
Hydroyclones are usually used after thickener, therefore the feeding concentration is usually high. Besides, the granule of tailing is usually small, which need to be with higher pressure when classify. Many experiment and data show that, the higher concentration of cyclone, the bigger feeding pressure, the bigger damage to the desilting throat and feeding pipe, the shorter using age of cyclone. Xinhai develops wear-resistance rubber for cyclone lining, whose wear- resistance capacity could compare the international standard and more wear-resistance than wear-resistance alloy. Now the wear-resistance rubber is widely used in cyclone manufacture.
All kinds of hydrocyclone produced by Xinhai Mining are widely used in thickening, classification, and mining processing. They have a series of advantages that high rate of classification, high rate of thickening, well wear-resistance, long using age and reduced price. Welcome to consult if you want to learn more about Xinhai hydrocyclone.
Ordinarily, fluorite mineral is suitable for gravity separation and flotation separation. Xinhai thinks that jig could be used in the gravity separation for the crude Fluorite mineral lump ore. ... [more]
Relying on low cost, high economic efficiency, advanced technology and equipment, Xinhai mineral processing EPC service extends its own area in the highly competitive Latin American mineral processing market ... [more]
Please leave your message here! We will send detail technical info and quotation to you!
Project | Video
Tel: 0086 15311826765
Fax: 0086 10 59621207
Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China
© 2017 Shandong Xinhai Mining Technology & Equipment Inc. Technical Support: 北京鑫互联科技有限公司
© 2017 Shandong Xinhai Mining Technology & Equipment Inc.