Providing optimized solutions for your mine, one-stop service for mineral processing plant!
Xinhai mineral processing equipment mainly include: grinding equipment, flotation equipment, dewatering equipment, magnetic separation equipment, and so on. Some of the equipment is Xinhai independent research and development, and has been awarded national patent. View details
Gold CIL (Carbon in Leach) Process is an efficient design of extracting and recovering gold from its ore. By cyaniding and carbon leaching crushed gold ore slurry simultaneously, CIL process lower the gold mining operation cost and increase gold recovery rate to a degree of 99%. View details
On October 11, the 3-day CHINA MINING Conference and Exhibition 2019 was conclud...
In vein gold deposit, there is some free gold in monomeric form with the bigger size. It is feasible both in technology and economy to separate this free gold by gravity separating method in advance in joint gold dressing process. In general, gravity separation is directly adopted to recycle this kind of gold. The gold ore refining equipment required is relatively simple, like chutes. However, for some gold ore with very small fineness, chemical dressing method like cyaniding and leaching is essential. And this method requires more gold ore refining equipment. From the view of the process, gold leaching is first conducted, which means leaching tank is needed, including single impeller leaching tank and double-impeller leaching tank. The gold ore flotation equipment with the single impeller also called axial flow leaching agitation tank, is designed and manufactured by China Central Engineering Institute for Nonferrous Metallurgical Industries. It works well under the following conditions, relatively bigger density, higher viscosity, fast settling velocity, more than 85% of -200 mess particles and gold leaching and absorption with less than 45% of slurry concentration.
When the impeller rotates clockwise, the blade immersing in the slurry will produce thrust, driving the slurry to flow into the blade along the top of circulating cylinder and then flow downward along the cylinder via the guide blade. When slurry flows through the circulating shell, it transverse flows and then flows upward along the circulating cylinder wall, forming a closed cycle. Such kind of gold ore flotation machine with single impeller leaching has the following advantages. First, it has good mixing performance with small energy consumption, big axial velocity, small radial velocity and intense drop plate strength. Second, located above the slurry sedimentation area, the impeller is easy to launch with small power. Third, with a simple structure of inflation device, it can inflate uniformly and achieve the full mixture of air and slurry. After leaching, absorption device like absorption tank is used to collect the gold. Shandong Xinhai Mining Technology & Equipment Inc is capable of providing all these gold ore refining equipment.
Conventional flotation gold dressing equipment can obtain good effect for coarse grained materials, but the gold ore slime separating index is not so ideal. ... [more]
Placer gold flotation mining equipment or gold recovery equipment is needed for gold ore with very fine particle size and wide range of dissemination size. ... [more]
Please leave your message here! We will send detail technical info and quotation to you!
Project | Video
Tel: 0086 15311826765
Fax: 0086 10 59621207
Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China
© 2017 Shandong Xinhai Mining Technology & Equipment Inc. Technical Support: 北京鑫互联科技有限公司
© 2017 Shandong Xinhai Mining Technology & Equipment Inc.